View CPH5824_4212414.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN7750
CPH5824
CPH5824
Features
* *
MOSFET : N-Channel Silicon MOSFET SBD : Schottky Barrier Diode
General-Purpose Switching Device Applications
*
*
DC / DC converter applications. Composite type with a N-channel sillicon MOSFET (MCH3405) and a schottky barrier diode (SB07-03C) contained in one package facilitating high-density mounting. [MOSFET] * Low ON-resistance. * Ultrahigh-speed switching. * 1.8V drive. [SBD] * Short reverse recovery time. * Low forward voltage. * Low reverse current.
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter [MOSFET] Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature [SBD] Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle 30 35 700 2 --55 to +125 --55 to +125 V V mA A C C VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm) 1unit 20 10 1.1 4.4 0.8 150 --55 to +125 V V A A W C C Symbol Conditions Ratings Unit
Marking : XA
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
61504 TS IM TA-101045 No.7750-1/6
CPH5824
Electrical Characteristics at Ta=25C
Parameter [MOSFET] Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage [SBD] Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time VR VF IR C trr IR=300A IF=700mA VR=15V VR=10V, f=1MHz, 1 cycle IF=IR=100mA, See specified Test Circuit. 25 10 30 0.55 80 V V A pF ns V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD ID=1mA, VGS=0 VDS=20V, VGS=0 VGS=8V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=1A ID=1A, VGS=4V ID=0.5A, VGS=2.5V ID=0.1A, VGS=1.8V VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit VDS=10V, VGS=4V, ID=1.1A VDS=10V, VGS=4V, ID=1.1A VDS=10V, VGS=4V, ID=1.1A IS=1.1A, VGS=0 0.4 1.4 2.3 175 215 295 100 22 15 6.5 28 19 13 1.8 0.4 0.4 0.87 1.2 230 300 410 20 1 10 1.3 V A A V S m m m pF pF pF ns ns ns ns nC nC nC V Symbol Conditions Ratings min typ max Unit
Package Dimensions unit : mm 2171
2.9
Electrical Connection
5
0.2
0.15
4
3
5
4
3
0.6
0.6
1.6
2.8
0.05
1 : Cathode 2 : Drain 3 : Gate 4 : Source 5 : Anode
1 2
Top view
1
0.95
2
0.4
1 : Cathode 2 : Drain 3 : Gate 4 : Source 5 : Anode SANYO : CPH5
0.2
0.4
0.7
0.9
No.7750-2/6
CPH5824
Switching Time Test Circuit
[MOSFET]
trr Test Circuit
[SBD]
VIN 4V 0V VIN
VDD=10V
Duty10%
100mA 10mA
D
PW=10s D.C.1%
10s --5V
G
100mA
ID=1A RL=10 VOUT
50
100
10
trr CPH5824
P.G
50
S
2.0
ID -- VDS
4.0V
V 2.5
[MOSFET]
2.0 1.8 1.6
ID -- VGS
Ta=
0 0.2 0.4 0.6 0.8 1.0
[MOSFET]
3.0V
1.6
6.0V
Drain Current, ID -- A
1
.5V
Drain Current, ID -- A
1.4 1.2 1.0 0.8 0.6 0.4 0.2
1.2
0.8
10.0V
0.4
VGS=1.0V
0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0 1.2 1.4 1.6 1.8 2.0
400
Drain-to-Source Voltage, VDS -- V IT02983 [MOSFET] RDS(on) -- VGS Ta=25C
400
Gate-to-Source Voltage, VGS -- V IT02984 RDS(on) -- Ta [MOSFET]
Static Drain-to-Source On-State Resistance, RDS(on) -- m
350
Static Drain-to-Source On-State Resistance, RDS(on) -- m
350
300
300
25
C
1.0A
250
ID=0.5A
250
I D=
200
, VG 0.5A
Ta= 75 C --25 C
2.5 S=
V
V
200
.0A, I D=1
=4.0 VGS
150
150
100 50 0 2 4 6 8 10 IT07165
100 50 --60
--40
--20
0
20
40
60
80
100
C 25 75 C C
120 140 160 IT07166
Gate-to-Source Voltage, VGS -- V
Ambient Temperature, Ta -- C
--25
VDS=10V
No.7750-3/6
CPH5824
10 7 5 3
yfs -- ID
[MOSFET] VDS=10V
Forward Transfer Admittance, yfs -- S
10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2
IF -- VSD
[MOSFET] VGS=0
3 2 0.1 7 5 3 2 0.01 0.001 2 3 5 7 0.01
= Ta
75
C
23
5 7 0.1
23
5 7 1.0
23
5
0.01 0.4
0.5
0.6
Ta =7
--2
5 C 25 C --2 5C
0.7 0.8 0.9
1.0 7 5
25
C
C 5
Forward Current, IF -- A
2
1.0
1.1
1.2
Drain Current, ID -- A
100 7
IT07167
SW Time -- ID
VDD=10V VGS=4V
[MOSFET]
3 2
Diode Forward Voltage, VSD -- V IT02988 Ciss, Coss, Crss -- VDS [MOSFET] f=1MHz
Switching Time, SW Time -- ns
5
tr
Ciss, Coss, Crss -- pF
3 2
td(off)
100 7 5
Ciss
tf
10 7 5 3 2 0.1
td(on)
3 2
Coss
Crss
10 2 3 5 7 1.0 2 3 5 IT07168 0 2 4 6 8 10 12 14 16 18 20
Drain Current, ID -- A
10 9
VGS -- Qg
[MOSFET]
10 7 5 3 2
Drain-to-Source Voltage, VDS -- V IT02990 [MOSFET] ASO
Gate-to-Source Voltage, VGS -- V
VDS=10V ID=1.1A Drain Current, ID -- A
IDP=4.4A
10s
1m s
8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 IT02991
ID=1.1A
1.0 7 5 3 2 0.1 7 5 3 2
10
10
m
s
Operation in this area is limited by RDS(on).
0.01 0.01
Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 1unit
23 5 7 0.1 23 5 7 1.0 23 5 7 10 23 5
Total Gate Charge, Qg -- nC
1.0
Drain-to-Source Voltage, VDS -- V
n s io 0m erat op C
IT07169
D
PD -- Ta
[MOSFET]
Allowable Power Dissipation, PD -- W
0.8
M
ou
nt
ed
on
0.6
ac
er
am
ic
bo
0.4
ar
d(
90
0m
m2 !0
0.2
.8m
m
)1
un
it
160
0 0 20 40 60 80 100 120 140
Amibient Tamperature, Ta -- C
IT07170
No.7750-4/6
CPH5824
5 3 2
IF -- VF
[SBD]
5 2 1000 5 2 100 5 2 10 5 2 1.0 5 2 0.1 0
IR -- VR
5 Ta=12 C
[SBD]
Reverse Current, IR -- A
Forward Current, IF -- A
1.0 7 5 3 2
100C
75C
50C
25C
25 C Ta= 1
0.1 7 5 3 2 0.01 0
25C
0.2
0.4
0.6
0.8
1.0 ID00383
5
10
15
20
25
30
35 ID00384
Forward Voltage, VF -- V
Average Forward Power Dissipation, PF(AV) -- W
0.8
PF(AV) -- IO
Reverse Voltage, VR -- V
2
[SBD]
C -- VR
[SBD] f=1MHz
Interterminal Capacitance, C -- pF
1.0
0.6
(1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 Rectangular wave
100 7 5
(4) (2)
(3)
0.4
360
(1)
3 2
0.2
Sine wave
180
10 7 1.0
0 0 0.2 0.4 0.6
360 0.8
2
3
5
7
10
2
3
5
7
Average Forward Current, IO -- A
2.8
ID00385
IFSM -- t
IS
Reverse Voltage, VR -- V
ID00386
[SBD]
Surge Forward Current, IFSM(Peak) -- A
Current waveform 50Hz sine wave
2.4
2.0
20ms t
1.6
1.2
0.8
0.4 0 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3
Time, t -- s
ID00247
No.7750-5/6
CPH5824
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2004. Specifications and information herein are subject to change without notice.
PS No.7750-6/6

▲Up To Search▲

Price & Availability of CPH5824

	To Download CPH5824 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .